EL Wire

This ‘Angel Hair’ EL Wire is not only the brightest of all the thicknesses of EL Wire it is also the most malleable and will hold its shape when bent like modelling wire making it a fun and useful material to work with 

EL Wire twisted into ringlets 

-

EL Wire twisted into a zig-zag pattern

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

the colours we have at present are:

Aqua (Tron Blue), Purple, Blue, Pink, Red, Orange, yellow, Lime Green, Turquoise-Green and White

And these lengths:

1metre, 3metre, 5metre and 10metre

(The 3.2mm diameter wire is also available in 10metre and 25metre lengths)

- – - – - – - – - – - –

This wire comes with a standard connector so simply plugs into any EL inverter – this makes it easy to change between coloured wire on one inverter

by using splitters you can also connect different strands to the same inverter

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

This wire can be cut into smaller lengths and attached to another inverter

Our inverters can run many different strips of wire as long as the total length of the wire is under the inverters maximum capacity

Wth some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isnt needed

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple… but rejoining it takes care and attention.

You will also definitely need some wirestrippers

You can happily use the joining tape and heatshrink tubing for a decent join but if the joint is likely to encounter stress (eg if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (eg behind a panel in a car) then we would advise soldering to avoid future hassle

There are How-tos and a forum on the site to get some great tips

We currently have 1m, 3m, 5m and 10m lengths of this 5mm Thick EL Wire

The 5mm wire is the least bright of the different thicknesses of EL Wire but is ideal for outdoor applications – Sunlight is not good for EL Wire and the thick coating on this wire protects it

Some people also prefer this thicker wire for its ‘chunky cable’ look

the colours we have at present are:

Aqua (Tron Blue), Purple, Blue, Pink, Red, Orange, yellow, Lime Green, Turquoise-Green and White

And these lengths:

1metre, 3metre and 5metre

(The 3.2mm diameter wire is also available in 10metre and 25metre lengths)

- – - – - – - – - –

This wire comes with a standard connector so simply plugs into any EL inverter – this makes it easy to change between coloured wire on one inverter

by using splitters you can also connect different strands to the same inverter

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

This wire can be cut into smaller lengths and attached to another inverter

Our inverters can run many different strips of wire as long as the total length of the wire is under the inverters maximum capacity

Wth some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isnt needed

Joining tape and tubing for re-attaching the wire are available from this store

- this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple… but rejoining it takes care and attention.

You will also definitely need some wirestrippers

You can happily use the joining tape and heatshrink tubing for a decent join but if the joint is likely to encounter stress (eg if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (eg behind a panel in a car) then we would advise soldering to avoid future hassle

There are How-tos and a forum on the site to get some great tips

The 3.2mm EL Wire is favoured by makers as it is robust and its thickness offers protection while still being bright. When placed on a costume or other project it keeps straight lines without showing kinks  

It is available in any of these colours:

Aqua (Tron Blue), Lime Green, Pink, Grass Green, Red, Orange, Purple, Yellow, Deep Blue, Turquoise-Green, and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to simply clip into an EL driver -  THE INVERTER/DRIVER HAS TO BE BOUGHT SEPARATELY

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH LISTED

- – - – - – - – - – - –

This wire comes with a standard connector so simply plugs into any EL inverter – this makes it easy to change between coloured wire on one inverter

by using splitters you can also connect different strands to the same inverter

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

This wire can be cut into smaller lengths and attached to another inverter

Our inverters can run many different strips of wire as long as the total length of the wire is under the inverters maximum capacity

Wth some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isnt needed

Joining tape and tubing for attaching EL Wire is available from this store
this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different inverter

Cutting the wire into the length you choose is simple… but rejoining it takes care and attention.

you will also definitely need some wirestrippers

you can happily use the joining tape and heatshrink tubing supplied for a decent join but if the joint is likely to encounter stress (eg if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (eg behind a panel in a car) then we would advise soldering to avoid future hassle

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours

We’re sure you will be amazed – feel free to email or ring me with any questions

The 2.3mm Electro- Luminescent  glow wire,

is available in any of these colours:

Aqua (Tron Blue), Lime Green, Pink, Red, Orange, Purple, Yellow, Deep Blue, Turquoise-Green, and White

And these lengths:

1metre, 3metre, 5metre and 15metre

(The 3.2mm diameter wire is also available in 10metre and 25metre lengths)

Because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White.

The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to clip into an EL Driver -  THE INVERTER/DRIVER HAS TO BE BOUGHT SEPARATELY

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our store

FEEL FREE TO CONTACT US IF WE DO NOT HAVE YOUR REQUIRED LENGTH OF EL WIRE LISTED

- – - – - – - – - – - –

This wire comes with a standard connector so simply plugs into any EL inverter – this makes it easy to change between coloured wire on one inverter

by using splitters you can also connect different strands to the same inverter

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

This listing is for 1.3mm fine Electroluminescent glow wire with a chasing motion.

This Chasing ‘Angel Hair’ EL Wire is very bright and the chasing motion looks amazing

 It flows in one continuous motion (it jumps a bit in this picture but that is just the video)  

EL Chasing Wire 

-

EL Chasing Wire

It is available in any of these colours:

Aqua (Tron Blue), Lime Green, Deep Blue, and White

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver (see drop down box above)

In the box above you can choose:

This Chasing Wire is available in 5metre lengths as well as the thicker 3.2mm Chasing Wire

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are availablin our online store

- – - – - – - – - – - –

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours

We’re sure you will be amazed – feel free to message me with any questions

This handy item is 2.3mm EL wire with sewable tag running along it available in a length of either 1m, 3m, 5m and 10metres.

(EL wire needs a driver to make it glow – available from £4 in our online store).

-

EL Wire twisted into a spiral

The wire is available in any of these colours:

Aqua (Tron Blue), Lime Green, Pink, Red, Orange, Purple, Yellow, Deep Blue, Turquoise-Green, and White

Because the EL naturally glows blue/green the brightest colour of the wire is the Aqua, Lime Green and White. The least bright are the red and purple as they have to be filtered the most to get the colours right.

The wire has a connector on it so is ready to clip into an EL Driver -  THE DRIVER HAS TO BE BOUGHT SEPERATELY

- – - – - – - – - – - –

This wire comes with a standard connector so simply plugs into any EL driver – this makes it easy to change between coloured wire on one driver.

By using splitters you can also connect different strands to the same driver.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.

-

This wire can be cut into smaller lengths and attached to another driver

Our drivers can run many different strips of wire as long as the total length of the wire is under the driver’s maximum capacity

Wth some care, the EL wire can be attached to speaker wire to make patterns or extend the wire over gaps where it isnt needed

Joining tape and tubing for attaching EL Wire is available from our online store this is if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver

Cutting the wire into the length you choose is simple… but rejoining it takes care and attention.

You will also definitely need some wirestrippers

You can happily use the joining tape and heatshrink tubing supplied for a decent join but if the joint is likely to encounter stress (eg if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (eg behind a panel in a car) then we would advise soldering to avoid future hassle

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours

We’re sure you will be amazed – feel free to message us with any questions!

Here we have some metre length, with a 3.2mm diameter, electroluminescent glow wire that has two cores running though the middle.

The Dual Cores obviously produce a brighter glow but there is another bonus; you can power this wire by a driver that is only supposed to power EL Wire that is double its length.

eg - a 3 metre Double Core EL Wire could be powered by a standard EL Driver that is for 6 metres of wire.

So you could use this wire with a mains driver that is for 5-15metres of wire – This makes it glow much brighter!

It is particularly noticeable in the less bright EL Colours such as the Red and Purple

Standard EL Wire on the Left and Double Core EL Wire on the Right – Both sharing a driver 

-

The Standard EL Wire using normal driver on the left – Double Core EL Wire using powerful driver on the right

It is available in any of these colours:

Aqua (Tron Blue), Red,  Lime Green, Orange, Deep Blue, and White

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver (see drop down box)

In the box below you can choose:

Just the 3 metres of Double Core EL Wire for £18

3 metres of Double Core EL Wire plus Powerful Portable 8xAA Driver for £25

3 metres of Double Core EL Wire plus Powerful Mains Driver for £28

3 metres of Double Core EL Wire plus Portable/Mains Driver for £30

5 metres of Double Core EL Wire for £30

5 metres of Double Core EL Wire plus Powerful Portable 8xAA Driver for £37

5 metres of Double Core EL Wire plus Powerful Mains Driver for £40

5 metres of Double Core EL Wire plus Portable/Mains Driver for £42

10 metres of Double Core EL Wire for £60

10 metres of Double Core EL Wire plus Powerful Portable 8xAA Driver for £67

10 metres of Double Core EL Wire plus Powerful Mains Driver for £70

10 metres of Double Core EL Wire plus Portable/Mains Driver for £77

- – - – - – - – - – - –

EL wire has loads of uses:

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours

We’re sure you will be amazed – feel free to message us with any questions

Here we have some beautiful EL Wire which is 5mm thick, with a colourful pattern and glows when the wire is attached to an EL Driver.

Other drivers for EL Wire than the ones listed above are available from our online store.

All of the EL Wire including this will already have an EL Connector attached.

You have a choice if you want this EL Wire to have a connector on both ends.

With the Double Ended EL Wire it is possible to cut the wire in half and both of these will glow if you plug them into an EL Driver.

This is what the EL Wire looks like close up.

Many strands of EL Wire can be connected to a single driver by using a splitter.

*It is not recommended to use a micro EL Driver for this multicoloured EL Wire. Because of the colourful sleeve, we recommend you use the brightest, most powerful driver you can*

- – - – - – - – - – - –

This wire comes with a standard connector so simply plugs into any EL inverter – this makes it easy to change between coloured wire on one inverter.

By using splitters you can also connect different strands to the same inverter.

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats.

-

This wire can be cut into smaller lengths and attached to another drivers.

Our drivers can run many different strips of wire as long as the total length of the wire is under the drivers maximum capacity.

Wth some care, the EL wire can be attached to thin electrical wire to make patterns or extend the wire over gaps where it isn’t needed.

Joining tape and heatshrink tubing are also available if you want to cut the EL wire and rejoin it or perhaps attach some wire to a different driver.

Cutting the wire into the length you choose is simple… but rejoining it takes care and attention.

You will also definitely need some wirestrippers.

You can happily use the joining tape and heatshrink tubing supplied for a decent join but if the joint is likely to encounter stress (eg if it is threaded into clothes that will then be bent and jostle) or if the join may be hard to reach (eg behind a panel in a car) then we would advise soldering to avoid future hassle.

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours.

We’re sure you will be amazed – feel free to message us with any questions.

This listing is for 3.2mm Electroluminescent glow wire with a chasing motion.

The chasing motion looks amazing

 It flows in one continuous motion (it jumps a bit in this picture but that is just the video)  

EL Chasing Wire 

-

EL Chasing Wire

It is available in any of these colours:

Aqua (Tron Blue), Gold, Purple, Red, Pink,  Lime Green, Deep Blue, and White

The wire has a special connector on it so does not clip into standard EL Wire connectors and needs a Chasing EL Wire Driver (see drop down box above)

We are now selling splitters for chasing El Wire if you would like 2 or 3 separate strands from the same driver

This Chasing Wire is also available in the thinner 1.3mm Chasing Wire

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are availabl in our online store

- – - – - – - – - – - –

EL wire has loads of uses

It looks amazing when decorating the interior or exterior of cars, can be used inside and outside houses and can even be threaded into clothes and hats

-

It is a cliche to say you are only limited by your imagination but with EL wire it is true!!!

If you have not seen it before it is like a really long glowstick that lasts over 5,000 hours

We””re sure you will be amazed – feel free to message me with any questions

this is a test product

cos we’re always trying make this site better for you lucky el fans!