EL Tape

This is for a 2 cm wide and 40cm long Electro-Luminescent  Tape.

Currently in stock we have these colours: Aqua (Tron Blue), White, Blue, Pink, Purple, Orange,  and Green

On the back of the the EL Tape it has wires with connectors already attached:

EL Tape is an incredibly versatile material it can be  wrapped around things.

To join it to a costume we recommend our ‘sewable-loop + stickable-hook’ velcro which allows you to sew one part of the velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it

EL Tape can even have holes and shapes punched into it and be cut to your chosen shape

This Tape is also available in 12cm, 25 cm and 1 metre lengths

(The 2XAA inverter can power this 40cm El Tape

The 8XAA inverter can power just over 2 metres of EL Tape).

This is 2 cm wide and 1metre long Electro-Luminescent  Tape.

Requires a Driver to make it glow

(The 8XAA Battery Driver/Inverter will power 2 of these pieces of tape plus 4 x EL Hoops)

A whole range of driver/inverters eg ones that plug in to car lighter or plug into household mains electricity are also available

if a different driver is more convenient then that can be arranged

Currently in stock we have these colours: Ice Blue, Red, White, Pink and Green

If the colour you want isn’t here, please contact me and it can be made for you.

On the back of the the EL Tape it has wires with connectors already attached:

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it

This Tape is also available in 25cm and 40cm lengths.

This listing is for 1 cm wide and 20cm long Electro-Luminescent  Tape.

This EL Ribbon needs a small inverter to power it – Visit our shop to see a selection of inverters and other EL goodies

The Colour glows a beautiful Ice Blue, White or Red

As you can see from the picture it is divided into segments the exact dimensions are:

The Strip itself is 1.5cm X 21cm

The Glowing section of it is actually 1.1cm wide

First there is a 1.1cm X 4.7cm glowing block

Then a 0.4cm X 1.5cm joining section

Next are two blocks of 1.1cm X 3.5cm

Joined by two 0.4cm X 1.5cm sections

Finishing with a 1.1cm X 4.2cm block

The wire to connect it to an inverter is 23cm long and has a standard EL Connector on the end

EL Tape is an incredibly versatile material it can be bent and wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape

It can be sliced into smaller strips in a similar way to EL wire (as with EL wire, rejoining it again needs some care and attention)

We also have continuos EL Tape in2cm X40cm and 2cm X 1 metre lengths

These are glowing hoop of Electro-Luminescent Tape 4.5cm wide available in White, Blue, Pink, Red and Green

The hoop needs an Inverter/Driver to make it glow – there is loads availble in this store

(The 2 X AA portable inverter is powerful enough to power 12 of them and the sequencer can power 30 hoops)

The EL Hoops have loads of creative uses but are especially good for making realistic Tron costumes

The EL Hoop is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch

This is for a 2cm wide and 25cm long Electro-Luminescent  Tape.

Currently in stock we have these colours: Aqua (Tron Blue), White, Blue, Pink, Purple, Orange,  and Green

On the back of the the EL Tape it has wires with connectors already attached:

EL Tape is an incredibly versatile material it can be  wrapped around things.

To join it to a costume we recommend our ”sewable-loop + stickable-hook” velcro which allows you to sew one part of the velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it

EL Tape can even have holes and shapes punched into it and be cut to your chosen shape

This Tape is also available in 12cm, 40cm and 1 metre lengths

(The 2XAA inverter can power two of these 25cm El Tapes

The 8XAA inverter can power just over 2 metres of EL Tape)

This is for a 2cm wide and 12cm long Electro-Luminescent  Tape.

Currently in stock we have these colours: Aqua (Tron Blue), White, Blue, Pink, Purple, Orange,  and Green

On the back of the the EL Tape it has wires with connectors already attached:

EL Tape is an incredibly versatile material it can be  wrapped around things.

To join it to a costume we recommend our ””sewable-loop + stickable-hook”” velcro which allows you to sew one part of the velcro to your costume while the stick pat goes on the back of this tape. The tape can then be removed from the costume to wash it

EL Tape can even have holes and shapes punched into it and be cut to your chosen shape

This Tape is also available in 25cm, 40cm and 1 metre lengths

(The 2XAA inverter can power two of these 25cm El Tapes

The 8XAA inverter can power just over 2 metres of EL Tape)

This listing is for a 1 cm wide and 15cm long Electro-Luminescent Tape.

Currently in stock we have these colours: Aqua (Tron Blue), White and Ice Blue 

On the back of the the EL Tape it has wires with connectors already attached

This EL Tape needs an Inverter/Driver to make it glow

The drop down box gives you an option to buy this item with a 2XAA battery inverter

EL Tape is an incredibly  versatile material it can be  wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape

This Tape is also available in 2cm X 12cm, 25cm, 40 cm and 1 metre lengths

This is a versatile piece of 2 cm wide and 1metre long Electro-Luminescent  Tape.

The EL Tape has wires with connectors attached to BOTH ENDS:

This means it can be cut into two pieces of any length you choose

A 2-way splitter is also provided so you can run both the EL Tapes off of one Driver/Inverter

When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape

Currently in stock we have these colours:

 Aqua (Tron Blue), Red, White, and Ice Blue

In the drop down box below is also the option to buy the EL Tape with a powerful portable driver (8XAA batteries)

This driver/inverter is powerful enough to drive just over 2 metres of this EL Tape in total and will make the Tape plug and play 

(If it is more convenient to have a car-lighter attachment instead of the 8 XAA battery box to power this driver please let me know)

In this store there is a whole selection of drivers available that could power this EL Tape such as Sequencer or Sound Activated Drivers

This is a 2cm wide and 12cm long Electro-Luminescent Tape with a 45º bend in the middle available in:

Aqua (Tron Blue), White,  Red, Green, Blue, Yellow, Orange , Purple and Pink

This El Curve has been designed to help you achieve a realistic Tron costume.

As you can see in the picture below it is is perfectly suited for use with straight EL Tape and the EL Hoops

EL Tape, Curve and Hoop in the Tron Style

All our El Wire and Tape comes with wires and connectors attached

Like all EL Tape and EL Wire the EL Curve needs an Inverter/Driver to make it glow

On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need

Standard EL Tape with wires and connector

We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories

The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch

This EL Tape has been designed to be worn down the base of the spine for a realistic Tron Costume.

The beautiful ‘Tron Circuit’ style can be worn on any part of the body to create an amazing effect.

The piece is 18cm tall and 9cm wide and available in these colours:

 Aqua (Tron Blue), White and Orange

It needs a Driver to make it glow

The Powerful Portable 8xAA Driver can power up to ten of these pieces.

Other Driver/Inverters and glowing EL parts of Tron costumes are available in our store.

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector

This EL Panel has loads of other creative uses but are especially good for making realistic Tron costumes

It is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

This EL Tape has been designed to be worn down the ankle and wrap around a boot for a realistic Tron Costume.

The beautiful ‘Tron Circuit’ style can be worn on any part of the body to create an amazing effect.

The piece is 32cm high and 22cm wide and available in these colours:

White and Orange

It needs a Driver to make it glow

The Powerful Portable 8xAA Driver can power up to four of these pieces 

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector

This EL Panel has loads of other creative uses but are especially good for making realistic Tron costumes.

It is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

With this ‘double ended’ tape you end up with two pieces of EL Wire for the price of one! – just cut it in half!!!!

This is a 3 cm wide and 1 metre strip of Electro-Luminescent Tape.

*The full Glow area of the Tape is 2.3cm X 1metre*

The EL Tape has wires with connectors attached to BOTH ENDS:

This means it can be cut into two pieces of any length you choose.

A 2-way splitter is also provided so you can run both the EL Tapes off of one Driver.

When cutting EL Tape or Panel it is best to use sharp scissors or craft knife and to seal the cut afterwards with glue and/or clear tape.

Currently in stock we have these colours:

Aqua (Tron Blue), Red, Green, White, and Ice Blue

In the drop down box below is also the option to buy the EL Tape with a powerful mains powered or portable driver (8XAA batteries)

These drivers are powerful enough to drive about 1 1/2 metre of this (3cm X 1metre) EL Tape in total and will make the Tape plug and play 

(If it is more convenient to have a car-lighter attachment instead of the 8 XAA battery box to power this driver please let me know)

There is a whole selection of drivers available at El Wire Craft that could power this EL Tape such as Sequencer or Sound Activated Drivers.

EL Tape is an incredibly versatile material it can be bent and wrapped around things and with care, can even have shapes cut into it.

Here we have a 10cm diameter circle of Electro-Luminescent Wire with a 3-D Pentagram inside available in Ice Blue, White and Aqua

Like all EL Tape and EL Wire this EL Shape needs an Inverter/Driver to make it glow – there is an option to have one supplied in the drop down box below.

If it is to be part of a larger EL project then you would be better off with a more powerful driver and some splitters – there is a selection available in our online store.

All our EL Wire and EL Tape has a connectors attached so (with the right driver) it is just plug and play!

Standard EL Tape with wires and connector

This EL Pentacle is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

Here is a 14cm diameter circle of Electro-Luminescent Tape available in Aqua (Tron Blue, White, Orange, Red and Blue 

This El Disc has been designed to help you achieve a realistic Tron costume as an Identity Disc on the back of the costume.

It needs a Driver to make it glow

The 2xAA driver can light this EL Disc up

The Powerful Portable 8xAA Driver will power this EL Disc PLUS another 2 pieces of 2cm X 1m EL Tape

Other Driver/Inverters and glowing EL parts of Tron costumes are available in our online store.

A White El Disc

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector 

The EL Discs have loads of other creative uses but are especially good for making realistic Tron costumes.

The EL Disc is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration. 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

The EL Bullseye is an EL Hoop with an EL Button fitted exactly inside it.

The EL Button can pop in and out of the Hoop making them interchangable.

The hoops and the buttons are available in a variety of colours:

 Aqua (Tron Blue), Blue, White,  Red, Green and  Orange

Ice Blue EL Bullseye and EL Button

As you can see in the picture below it is is perfectly suited for use with straight EL Tape and the EL Hoops and EL Buttons are available separately in our online store.

EL Bullseye, EL Hoop and EL Button

The EL Hoop and the EL Button already have wires and connectors attached – with this set we supply a 2-way-splitter to bring these two together

All our El Wire and Tape comes with wires and connectors already attached making it simply plug-and-play

Standard EL Tape with wires and connector

The EL Hoops and EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes.

They are made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have a 3cm diameter circle of Electro-Luminescent Tape available in Aqua (Tron Blue), White, Red, Yellow, Green, Pink, Blue and Orange

This El Button has been designed to help you achieve a realistic Tron costume.

3 EL Buttons in a row

Like all EL Tape and EL Wire, the EL Buttons need an Inverter/Driver to make it glow – you have the option in the drop down box below to buy these hoops with a 2XAA battery Driver - there is a bigger selection in our online store including splitters where you could have up to 10 of them off this single Driver.

Standard EL Tape with wires and connector

The EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Button is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have a glowing hoop of Electro-Luminescent Tape 6cm wide available in Aqua (Tron Blue), White, Blue, Red, Green, Orange , Yellow, Purple and Pink

The hoop needs an Inverter/Driver to make it glow

There is an option within the drop down box to have a 2XAA baterry driver included

(The 2 X AA portable inverter is powerful enough to power 4 of these – see the online store for 4xHoops for more driver options, including mains powered.)

EL Hoop with some EL Tape in the Tron Style

If you want to link hoops together it is possible to make a single complete cut through the hoop and it will still continue to glow!

The EL Hoops have loads of creative uses but are especially good for making realistic Tron costumes

The EL Hoop is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration. 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have a 2cm wide and 12cm long Electro-Luminescent Tape with a 45º bend in the middle available in Aqua (Tron Blue), White,  Red, Green, Blue, Yellow, Orange , Purple and Pink

This El Curve has been designed to help you achieve a realistic Tron costume.

As you can see in the picture below it is is perfectly suited for use with straight EL Tape and the EL Hoops available in our online store.

EL Tape, Curve and Hoop in the Tron Style

All our El Wire and Tape comes with wires and connectors attached

Like all EL Tape and EL Wire the EL Curve needs an EL Driver to make it glow - there is a selection available in our online store.

On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need.

Standard EL Tape with wires and connector

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes.

The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to a costume or even a wall for decoration. 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.