EL Shapes

This is a 2cm wide and 12cm long Electro-Luminescent Tape with a 45º bend in the middle available in:

Aqua (Tron Blue), White,  Red, Green, Blue, Yellow, Orange , Purple and Pink

This El Curve has been designed to help you achieve a realistic Tron costume.

As you can see in the picture below it is is perfectly suited for use with straight EL Tape and the EL Hoops

EL Tape, Curve and Hoop in the Tron Style

All our El Wire and Tape comes with wires and connectors attached

Like all EL Tape and EL Wire the EL Curve needs an Inverter/Driver to make it glow

On this EL Curve, the wires are connected in the middle of the bend so either end can be cut to a shape you need

Standard EL Tape with wires and connector

We also stock a wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories

The EL Curves have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Curve is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch

This Union Jack not only glows but is as thin as a flag too

It can be attached to a car window, hung up in the house… or even worn!

This glowing flag is 15cm wide and 8cm tall

It comes with 4 suckers that easily allow it to be attached to a window

And Tabs on each corner so it can easily be hung up or attached to a hat or shirt

It not only glows – it can flash too!

This special thin panel (1/3mm) needs its own driver to power it.

The power source can either be:

 1) A small portable box with a clip that takes 4XAAA batteries

2) A car lighter attachment that means the flag be stuck to a car window (window suckers are provided, as well as extension wires to help it reach a back window)

3) A Mains Plug so it can be plugged into a mains socket so can be hung up  in your house

4) A USB adapter even allows your computer to feel national pride! (no flashing option)

Choose the power source you need in the box above

THIS WHOLE KIT IS ALL YOU NEED - JUST PLUG AND PLAY

This EL Panel lightning shape looks amazing and can be sewn onto costumes or stuck together to make  a fantastic lightning bolt

Made from EL Panel they are just 1/3mm thick and flexible

Each one is 10cm long and available in White or Aqua

If you buy these in two’s then i will always supply a free 2-way splitter and a ‘left’ and a ‘right’ lightning bolt so you can pair them up. If you want them all the same way, please send a message with your purchase.

other inverters, EL Panel, EL Tape and EL Wire is available in our store

Or contact me if you have questions

EL Tape is an incredibly versatile material it can be bent and wrapped around things.

It can even have holes and shapes punched into it and be cut to your chosen shape

All our EL Wire and EL Tape has a connectors attached so (with the right driver) it is just plug and play

Standard EL Tape with wires and connector

We have EL Panels and EL Tape in all sorts of shapes and sizes

including animated and sound activated moving panels

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available in this store

This EL Tape has been designed to be worn down the base of the spine for a realistic Tron Costume.

The beautiful ‘Tron Circuit’ style can be worn on any part of the body to create an amazing effect.

The piece is 18cm tall and 9cm wide and available in these colours:

 Aqua (Tron Blue), White and Orange

It needs a Driver to make it glow

The Powerful Portable 8xAA Driver can power up to ten of these pieces.

Other Driver/Inverters and glowing EL parts of Tron costumes are available in our store.

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector

This EL Panel has loads of other creative uses but are especially good for making realistic Tron costumes

It is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

This EL Tape has been designed to be worn down the ankle and wrap around a boot for a realistic Tron Costume.

The beautiful ‘Tron Circuit’ style can be worn on any part of the body to create an amazing effect.

The piece is 32cm high and 22cm wide and available in these colours:

White and Orange

It needs a Driver to make it glow

The Powerful Portable 8xAA Driver can power up to four of these pieces 

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector

This EL Panel has loads of other creative uses but are especially good for making realistic Tron costumes.

It is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have a 10cm diameter circle of Electro-Luminescent Wire with a 3-D Pentagram inside available in Ice Blue, White and Aqua

Like all EL Tape and EL Wire this EL Shape needs an Inverter/Driver to make it glow – there is an option to have one supplied in the drop down box below.

If it is to be part of a larger EL project then you would be better off with a more powerful driver and some splitters – there is a selection available in our online store.

All our EL Wire and EL Tape has a connectors attached so (with the right driver) it is just plug and play!

Standard EL Tape with wires and connector

This EL Pentacle is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

Here is a 14cm diameter circle of Electro-Luminescent Tape available in Aqua (Tron Blue, White, Orange, Red and Blue 

This El Disc has been designed to help you achieve a realistic Tron costume as an Identity Disc on the back of the costume.

It needs a Driver to make it glow

The 2xAA driver can light this EL Disc up

The Powerful Portable 8xAA Driver will power this EL Disc PLUS another 2 pieces of 2cm X 1m EL Tape

Other Driver/Inverters and glowing EL parts of Tron costumes are available in our online store.

A White El Disc

All our El Wire and Tape comes with wires and connectors attached

Standard EL Tape with wires and connector 

The EL Discs have loads of other creative uses but are especially good for making realistic Tron costumes.

The EL Disc is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration. 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

The EL Bullseye is an EL Hoop with an EL Button fitted exactly inside it.

The EL Button can pop in and out of the Hoop making them interchangable.

The hoops and the buttons are available in a variety of colours:

 Aqua (Tron Blue), Blue, White,  Red, Green and  Orange

Ice Blue EL Bullseye and EL Button

As you can see in the picture below it is is perfectly suited for use with straight EL Tape and the EL Hoops and EL Buttons are available separately in our online store.

EL Bullseye, EL Hoop and EL Button

The EL Hoop and the EL Button already have wires and connectors attached – with this set we supply a 2-way-splitter to bring these two together

All our El Wire and Tape comes with wires and connectors already attached making it simply plug-and-play

Standard EL Tape with wires and connector

The EL Hoops and EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes.

They are made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration.

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have a 3cm diameter circle of Electro-Luminescent Tape available in Aqua (Tron Blue), White, Red, Yellow, Green, Pink, Blue and Orange

This El Button has been designed to help you achieve a realistic Tron costume.

3 EL Buttons in a row

Like all EL Tape and EL Wire, the EL Buttons need an Inverter/Driver to make it glow – you have the option in the drop down box below to buy these hoops with a 2XAA battery Driver - there is a bigger selection in our online store including splitters where you could have up to 10 of them off this single Driver.

Standard EL Tape with wires and connector

The EL Buttons have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Button is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have a glowing hoop of Electro-Luminescent Tape 6cm wide available in Aqua (Tron Blue), White, Blue, Red, Green, Orange , Yellow, Purple and Pink

The hoop needs an Inverter/Driver to make it glow

There is an option within the drop down box to have a 2XAA baterry driver included

(The 2 X AA portable inverter is powerful enough to power 4 of these – see the online store for 4xHoops for more driver options, including mains powered.)

EL Hoop with some EL Tape in the Tron Style

If you want to link hoops together it is possible to make a single complete cut through the hoop and it will still continue to glow!

The EL Hoops have loads of creative uses but are especially good for making realistic Tron costumes

The EL Hoop is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration. 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.

Here we have two seperate items: either a 7cm or 10cm diameter circular EL Panel.

Ideal for backlighting dashboard gauges the EL Panel glows very brightly and can also be used for decoration or fancy-dress costumes

The Panel needs an Inverter/Driver to power it and we have a choice of 4.2v, 6v, 9v and 12v drivers that are designed not to take up too much space if you are installing it as a backlight – or can be portable if it is for a costume.

Alternatively you can contact us with your needs and we’ll work out what would be best for you.

Currently available in :Ice Blue or  White

Please select which size of Round EL Panel you wish to purchase. Either in 7cm diameter or 10cm from the drop down box below.

Here we have Two EL Arrows inside a laminate that is 4cm wide and 8cm long with wires and connector already attached (needs an EL Driver)

We Currently only have EL Arrows in white

Ideal for fancy dress costumes or safety signage

 -

EL Tape is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration and can be bent and wrapped around things.

-

It can even have holes and shapes punched into it and be cut to your chosen shape

We have EL Panels and EL Tape in all sorts of shapes and sizes

including animated and sound activated moving panels

All our El Wire and Tape comes with wires and connectors attached

ALL EL WIRE AND EL TAPE NEED A DRIVER/INVERTER TO MAKE THEM GLOW available from our online store.

12cm EL CURVE

Here we have a Tron Double Hoop shape that is 15cm long made from Electroluminescent Tape.

The First Hoop is 6cm Wide – the same as our single EL Hoops. The End hoop is just 4cm Wide

This shape is available in:

 Aqua (Tron Blue) and Orange

Double Hoops in Aqua and Orange

This Double Hoop has been designed to help you achieve a realistic Tron costume.

All our El Wire and Tape comes with wires and connectors attached

Like all EL Tape and EL Wire the EL Double Hoop needs an EL Driver to make it glow - choose from the drop down box else there is a selection available in our online store.

Standard EL Tape with wires and connector

A wide selection of other EL Tape, EL Wire, Sequencers, Drivers and helpful EL accessories are available from our online store.

The EL Double Hoops have loads of other creative uses but are especially good for making realistic Tron costumes

The EL Double Hoop is made from EL Tape which is paper thin (300 micron) so it is incredibly versatile and can be easily attached to costume or even a wall for decoration 

We have a whole range of EL Wire, EL Tape and many types of driver/inverters  are also available.

If you want any help or advice in planning your EL costume feel free to get in touch.